|
TH SERIES: |
|
- TH Series heavy duty CNC roll grinder is used for steel, paper, plastic industry to regrind with steady rests for heavy roll with traveling wheelhead.
- All major parts of the machine are casted with highly rigid structure and are suitable for precisely grinding the heavy roll with wide-range diameter.
- Hydrodynamic/Hydrostatic bearings for wheel spindle and guideways, no wear appeared.
- Laser is used to measure the parallel and straightness of the guideway.
|
|
|
THC SERIES: |
|
- THC series is the grinding between centers type machine for roll manufacturer.
- High rigidity structure can reach high accuracy and efficient grinding.
- It can complete the grinding for barrel, neck and transmission part with once loading of workpiece.
|
|
|
|
Model Description: |
|
|
|
|
|
TH Series Traveling Head Type Heavy Duty CNC Roll Grinder |
|
|
TH100 |
TH125 |
TH160 |
TH200 |
TH250 |
TH300 |
Max.swing over bed |
φmm |
1000 |
1250 |
1600 |
2000 |
2500 |
3000 |
Max.distance between centers |
M |
3、4、5~10 |
3、4、5~16 |
3、4、5~16 |
3、4、5~16 |
3、4、5~16 |
3、4、5~16 |
Max.weight of roll |
between Centers |
Tons |
15、20 |
15、20 |
15、20 |
20、25 |
20、25 |
20、25 |
with Steady Rests |
Tons |
15、20 |
25、30、35~60 |
40、50、60~80 |
40、50、60~120 |
40、50、60~120 |
40、50、60~120 |
Max.dia. of crown |
φmm |
0.05~10 |
0.05~10 |
|
|
|
|
THC Series Traveling Head Type Heavy Duty CNC Roll Grinder for roll manufacturer |
|
|
THC100 |
THC125 |
THC160 |
THC200 |
THC250 |
THC300 |
Max.swing over bed |
φmm |
1000 |
1250 |
1600 |
2000 |
2500 |
3000 |
Max.distance between centers |
M |
3、4、5~10 |
3、4、5~16 |
3、4、5~16 |
3、4、5~16 |
3、4、5~16 |
3、4、5~16 |
Max. weight of roll between centers |
Tons |
20、30、40、50 |
30、40、50~70 |
40、50、60~90 |
40、50、60~100 |
40、50、60~100 |
40、50、60~100 |
Max.dia. of crown |
φmm |
0.05~10 |
0.05~10
|
|
|
|
|
|
|
|
WHEEL HEAD: |
|
|
Wheel head is mounted on carriage and uses continuous fine wear to compensate straight line motion to grind convex. Wheel spindle is made of nickel-chromium steel by induction hardened, heat treatment, dynamic balance and precise grinding and supports by unique hydrodynamic/hydrostatic lubrication system Before wheel head goes, the lubrication unit provides enough pressure oil. When the pressure switch detects the oil pressure reaching to the setting pressure, it will start running. Before bearing stop running, pressure oil will supply until the wheel head completely stops running to make sure there is no friction between metals and the wheel head will run on oil film forever.
|
|
|
|
|
HEADSTOCK: |
|
|
Headstock adopted Germany made SKF precise bearing, and is suitable for high accurate heavy loading. Spindle is driven by a variable speed motor through Germany made precise reductor and passes by universal joint to rotate workpiece. Faceplate installed driving dogs or universal joint by direct transmission rotation to reach steady motion and used CNC command to set the rotation speed.
|
|
|
|
|
TAILSTOCK: |
|
|
Tailstock is composed by upper and lower parts. Using the upper traverse part adjusts center to center amendment with air pressure floating device to decrease friction and wear. Wheel dresser device is mounted on the upper part of tailstock to grind wheel's front and side by program's setting shape.
|
|
|
|
|
GUIDEWAY: |
|
|
Machine uses hydrodynamic/hydrostatic lubrication guideway with TRITE-B to decrease friction for acquiring best sliding condition and provides best fixing accuracy and most indeed accuracy.
|
|
|
|